Speed Bumps And Speed Humps

Intersection Humps/Raised Intersections
continued from Raised Crosswalks

Intersection humps raise the roadway at the intersection, forming a type of “plateau” across the intersection, with a ramp on each approach.  The plateau is at curb level and can be enhanced through the use of distinctive surfacing such as pavement coloring, brickwork, or other pavements. In some cases, the distinction between roadway and sidewalk surfaces is blurred. If this is done, physical obstructions such as bollards or planters should be considered, restricting the area to which motor vehicles have access.

Design Considerations:
• Ramps should not exceed a maximum gradient of 16 percent.
• Raised and/or textured surfaces can be used to alert drivers to the need for particular care.
• Distinctive surfacing helps reinforce the concept of a “calmed” area and thus plays a part in reducing vehicle speeds.
• Distinctive surfacing materials should be skid-resistant, particularly on inclines.
• Ramps should be clearly marked to enable bicyclists to identify and anticipate them, particularly under conditions of poor visibility.
• Care must be taken so the visually impaired have adequate cues to identify the roadway’s location (e.g., tactile strips). Color contrasts will aid those who are partially sighted.

Next… Traffic Calming - Reducing Street Area Where Motor Vehicle Traffic is a Priority.

The most fundamental traffic-calming goal is to reduce the speed of vehicular traffic . With the reduction of speed, the following important objectives can be realized:

1. Improved “feel” of the street.

This objective calls for increased community involvement in and “ownership” of the street. If people feel more comfortable on the street, they are more likely to walk or bicycle there and to engage in other street oriented activities with their neighbors. A key aspect of achieving this objective is reducing the perceived threat of danger from motor traffic.

2. Enhanced aesthetic values and a sense of nature.

Several traffic-calming techniques, such as street landscaping, pedestrian amenities, and reclamation of roadway areas can serve as community open space.  Not only do these techniques make the neighborhood more attractive, but they also break up long, uninterrupted street vistas conducive to speeding and convey the message that “this is a pedestrian place.”

3. Reduced crime.

It’s harder to make a speedy getaway if a fleeing felon has to deal with speed humps, woonerfs, and traffic circles. It’s harder to get away without being spotted if there are “eyes on the street” – if the street is a positive, community focus.

4. Equitable balance among transportation modes.

With reduced motorist speeds, safety is improved. Pedestrians and bicyclists have more time to detect and avoid motor vehicles. Traffic calming sends the message that “motor vehicles don’t exclusively
OWN the roadway” – that other modes have equal rights. Studies that evaluate traffic-calming improvements show increased levels of walking, bicycling, and transit use following installation.

5. Increased safety/decreased severity of injury in traffic crashes.

With reduced speeds comes a significant reduction in the number and severity of crashes involving motor vehicles. Traffic-calming facility evaluations uniformly show fewer crashes, fewer fatalities, and less severe injuries.

6. Improved air quality and noise levels.

Slower moving vehicles make less noise and, generally, emit fewer pollutants.

7. Decreased fuel consumption.

With more trips made by walking, bicycling, and transit, and with slower traffic speeds, fuel consumption reductions of 10 to 12 percent have been reported.

8. Continued accommodation of motor vehicle traffic.

An important objective is the continued accommodation of motor vehicle traffic. Although traffic calming shifts the balance among travel modes, this shift should not result in severely restricted traffic volumes or in shifting traffic problems from the traffic-calmed area to other streets.

Traffic Calming? What is it?

According to our friends at the Instutute of Transportation Engineers:

Traffic Calming is the combination of mainly physical measures that reduce the negative effects of motor vehicle use, alter driver behavior and improve conditions for non-motorized street users.¹

Traffic calming goals include:

• increasing the quality of life;
• incorporating the preferences and requirements of the people using the area (e.g., working, playing, residing) along the street(s), or at intersection(s);
• creating safe and attractive streets;
• helping to reduce the negative effects of motor vehicles on the environment (e.g., pollution, sprawl); and
• promoting pedestrian, cycle and transit use.¹

Traffic calming objectives include:

• achieving slow speeds for motor vehicles,
• reducing collision frequency and severity,
• increasing the safety and the perception of safety for non-motorized users of the street(s),
• reducing the need for police enforcement,
• enhancing the street environment (e.g., street scaping),
• encouraging water infiltration into the ground,
• increasing access for all modes of transportation, and
• reducing cut-through motor vehicle traffic.

¹Lockwood, Ian. ITE Traffic Calming Definition. ITE Journal, July 1997, pg. 22.

This excellent article just about says it all.  It not only defines what traffic calming is it also provdes the objectives and goals of traffic calming devices.

As I am sure you can tell from this excerpt, the ITE traffic calming website is an excellent resource to use when you need information about speed bumps, speed humps, speed tables or any other type of traffic calming device.  So check it out!